The tanks are sorted by capacity starting with the least!
0 V2A Transportation tanks, 200 l, stackable, bottom conical, free standing on 4 VA feet with shoes for lift-truck
(at the moment not available)
Make: make Eurocont
Built: ca. 1989 and others
Container size: Diam. outside = 550 mm, height = 1.260 mm
Allowed operating pressure: 1 bar (test pressure 1,5 bar)
Vacuum underpressure: 0,15 bar
Capacity: 200 l each
Material: Material-No.: 1.4301, Short name: X5CrNi18-10, Description: AISI304
Tara: á ca 42 - 45 kg
Form: cylindrical, standing, on 4 feet
Bottoms: at the bottom = conical with rest outlet NW 50 KM, on the top = round bottom form
Transportation devices: 1: stiffening of the 4 legs via flatirons for lifttruck
Lid: tanks make Eurocont screwable lid with thread, diameter = 195 mm / tanks make Luwa Berleburg GmbH screwable lid with thread, diameter = 125 mm.
Equipped with: 1.) rest outlet NW 50 with disc valve 2.) VA overpressure valve in lid 3.) Clip-valve-connection in dome lid 4.) make Eurocont also has a supply NW 40 G.
Miscellaneous: The containers are universally usable. Especially as an alternative for home-breweries. But they are also effectively suitable in the area of concentrates, schnaps, wine, juice, etc.
Condition: Quality classes from traces of use to middle traces of use to stronger traces of use to strong deformations and dents. The prices depend on the condition of the containers.
Internal number (Please include with all questions/orders!!): BT09/010
1 filter caldron in stainless steel, free standing on 3 VA feet, with tiltable lid
Capacity: ca. 400 L
Make: n.a.
Operating pressure: n.a.
Built: n.a.
Size: diam. max. (lid) = 0,90 m / diam. caldron outside = 0,72 m / H total = ca. 1,90 m / H vessel = 1,00 m
Supplies: 1 rest outlet DN 80 G - screwed on via
flange
Supplies vessel bottom: 1 x DN 80 G / 1 x ca. 65 mm outer thread / 1 x ca. 50 mm
outer thread
Supplies vessel in lid: 1 x supply for sight glass with flange, diam. inside ca. 55 mm /
1 x dome armatur middle, ca. 1/2"
1 x 50 mm inner thread with dome armature
1 x 1/2" inner thread
Lid: openable via hand lever in brass, tiltable via
axxis.
sealable via 14 clamp screws
stainless steel-brass
Internal number (Please include with all questions/orders!!): T02/11
2 x 2 horizontal beer dispensing tanks á 500 l, make Duotank, saddled on top of each
other in 2 double saddle bearings (not coolable, not insulated)
Make: Fa. Duotank
Capacity: á 500 l
Built: 2 x 2006 / 2 x 2008
Operating pressure: 3 bar (without documents)
Test pressure: 4,3 bar
Design-Temp.: 30 degree Celsius
Cat.: III
Medium: beer + air/CO2
Material: 1.4301
Supplies: for the 4 tanks, all outlet armatures (prepared
for inliners) and all overpressure armatures
are available.
Outlet armatures in stainless
steel:
a.) eiter as outlet armature prepared for inliners with diskvalve and
45-degree-bent with Camlock-
fast coupling supply, diameter inside 32 mm
(there are at the moment 2 beer distributors with 2 supplies each for these
fast couplings available.
These can be bought for a small additional price)
b.) or outlet armature prepared for inliner with norm thread NW 40 thread
and 90-degree-bent
(outlet towards left)
c.) overpressure armatures: with overpreusse valve, pressure meter and air
supply
Manhole: in frontside, made of plexiglas, W = 240 mm / H = 190 mm, with 25 mm thick acrylic glass lid
ca. size tank: diam. = 0,79 m / L frame = 0,85 m /
L total = 1,30 m / H total = 1,85 m / L tank without lid = 1,235 m
maximum width = 0,83 m / H total = 1,85 m
Remark: these tanks are designed for the use with
inliners (only with inliners, because the supply for the overpressure
armature is lower than the level of the tank when completely filled, and the
supply is only closed with a plate
towards to top of the middle of tank, which is not continually welded).
Internal number (Please include with all questions/orders!!): T02/14
1 horizontal beer pressure tank 500 l, make Duotank, single-walled, in VA single frame
Make: Fa. Duotank
Capacity: 500 l
Built: 2005
No.: 50023
Type: 0343
Operating pressure: 3 bar (without papers)
Test pressure: 4,3 bar
Size tank: L total = ca. 1,89 m / L vessel = 1,50 m / diam. outside = 0,65 m
Size frame: H = 1,15 m / B = 0,71 m
Supplies: 1 rest outlet diam. inside = 35 mm (without
outlet armature)
1 supply for overpressure armature 1 Zoll AG
Armatures: Outlet armature:
the outlet supply of the tank has an outer thread for a nut DN 25
a suitable outlet armature, which is prepared for inliners, is at the moment
not on stock.
if needed, it would have to be ordered new from Duotank.
a "normal" outlet diskvalve DN 25 KM/G is available, the seat on
the tank has to be adjusted.
overpressure armature: with overpreusse valve, pressure meter and air
supply
Manhole lid: acrylic glass with frame in stainless steel
Internal number (Please include with all questions/orders!!): T02/16
0 horizontal beer dispensing tank, capacity 500 litres, insulated and coolable, with plastic
outer shell, in single frames in stainless steel (2 ground bearing shells each) with adjusting screws
(at the moment not available)
Capacity: 500 l
Make: Fa. Duotank
Built: 2006
Operating pressure: 3 bar
Test pressure: 4,3 bar
Size: L with armatures = max. 1,90 m / L without armatures = 1,80 m /
diam. outside = 0,695 m /
H in frame = min. 0,90 m
Armatures: each with 1 outlet armature, prepared for
Inliner, with diskvalve DN 32 Camlock
(can be welded into DN 32 norm thread or thread DN 40 G with 90-degree-curve
and outlet
sideways (or the 90-degree-curve has to be shortened to 45 degress - than
with outlet towards
the front - see photos.))
each with 1 overpressure armature
Supplies: each with 2 coolant supplies
Manhole: W = 240 mm / H = 190 mm / with acrylic glass
lid
Material: inside stainless steel / outside plastic -
black lacquered
Internal number (Please include with all
questions/orders!!): T02/17a
1 V2A transport container 600 l, stackable, bottom conical, free standing,(there is personal use at the moment)
on 4 VA feet with shoes for fork lift truck and frame for hand pallet truck.
Make: Stöcklin
Built: unknown
Size: diameter outside = 1.015 mm, height with
stacking rim = 1.310 - 1.320 mm
Operating pressure: 1 bar
Vacuum: 0,15 bar
Capacity: á 600 l
Material: Material-No.: 1.4301, Short name:
X5CrNi18-10, type: AISI304
Weight: á 108 - 110 kg
Form: cylindrical, standing on 4 VA feet
Bottom: below = conical with rest outlet NW 50 with
diskvalve, on top = round bottom
Transport equipment: feet equipped for
transport with hand pallet truck; 2 shoes for fork lift truck in stainless
steel.
Dome lid: diam. = 400 mm with conical
seat - closeable with bayonet joint lid, sealing via 0-ring.
Equipped with:
1.) rest outlet NW 50 with disk valve NW 50 G (welded)
2.) VA overpressure valve in dome lid (3 different types, see photos)
3.) Clipventil-supply in dome lid
4.) The lid is prepared for a sterile air filter mit VA lid (there are some
on stock, please ask)
Condition: with middle to stronger traces of use
Miscellaneous: The container is universally usable. Especially as an alternative for home-breweries. But
they are also effectively suitable in the area of concentrates, schnaps,
wine, juice, etc.
Internal number (Please include with all
questions/orders!!): BT20/005a
ca. 50 transport containers in stainless steel, á 800 l, cylindrical, stackable
Capacity: á 800 l
Make: Fa. Thielmann / Fa. Luwa
Operating pressure: 1,0 bar
Weight: 136 - 140 kg
Built: 1981 - 1994
Operating temperature: not known
ca. size: diam. inside = 0,995 m / diam. outside =
1,00 m / H total = ca. 1,73 m / H vessel = 0,90
m /
H cone = 0,27 m / L max. = 1,00 m / W max. = 1,00 m
Supplies: 1 rest outlet NW 50 with diskvalve NW 50 G
(welded)
1 supply for overpressure valve, prepared inside for sterile air filter,
with cap
1 CO2 clip supply in dome lid (like NCC)
Domelid: 1 dome lid, closeable via 6 screws in
stainless steel, with screw nuts in brass
dome opening in vessel diam. inside = 0,39 m, diameter lid outside = 0,52 m
Bottom: on top round, at bottom flatconical
Feet: 4 feet with bracing in stainless steel (flat iron) 40 x 10 mm
Stacking: according to the previous owner, the containers can be stacked 1 x (full or empty)
Material: stainless steel
Previous use: food stuff
Miscellaneous: The containers are
universally usable. Especially as an alternative for home-breweries (becaues
of the 1,0 bar operating pressure). But
they are also effectively suitable in the area of concentrates, schnaps,
wine, juice, etc.
The vessel are used, empty and tight. They have traces of use, possible dents are
mostly already repaired.
Internal number (Please include with all questions/orders!!): BT25/019
ca. 10 transport containers in stainless steel, á 800 l, not stackable, in transport frames
Capacity: 800 l each
Make: Fa. Waldner Wangen
Operating pressure: 1,0 bar
Weight: around ca. 126 kg
Year of construction: several
Operating temperature: 85° celsius
Size frame: L max. = 1,09 m / W max. = 1,09 m / H = ca. 1,78 m
Size tank: diam. inside = 0,995 m / H vessel = 0,90 m / H with lid = ca. 1,50 m
Supplies: 1 rest outlet NW 50 KM with disk valve
thread/thread each
1 supply in dome lid NW 40 G with screwed-on overpressure valve each
1 clip supply in dome lid (like NCC) each
Dome lid: 1 dome lid, diam. inside = 0,40 m, closeable via 6 fastening screws
Bottom: flat conical
Material: tank stainless steel / transport frame aluminium
Previous use: for food stuff and fruit juices
Remark.: 1.) the containers have at the front abrasion
marks from the removal of former stickers (see photos - third photo
from the top).
2.) from most of these containers, previous dents have been repaired.
3.) from the available dome lids for these containers, only 4 are gas-tight.
The other lids have hairline cracks on
the weld around the ball-lock-valve. These have to be welded again by the
buyer.
4.) the aluminium frames for these vessels have partly cracks or a side beam
is missing. They are not suitable
for stacking anymore but only for transport, therefore special price.
Internal number (Please include with all questions/orders!!): BT25/020a
3 transport containers in stainless steel, á 800 l, not stackable, in transport frames
(with lower operating pressure than the containers BT25/020a - only 0.5 bar)
Capacity: á 800 L
Make: Fa. Waldner Wangen
Operating pressure: 0.5 bar
Weight: around ca. 126 kg
Built: 9 x 1981
Operating temperature: 120° Celsius
Size frame: L max. = 1,09 m / W max. = 1,09 m / H = ca. 1,75 m
Size tank: diam. inside = 0,995 m / H vessel = 0,90 m / H with lid = ca. 1,50 m
Supplies: 1 rest outlet NW 50 KM with diskvalve G/S
(outlet pipe reduced from DN 80 to DN 50)
1 supply in dome lid for inch tread
1 tilted valve NW 25 G/S
1 supply NW 20 G with filling height probe
2 of these tanks have an additional supply NW 50 in the dome lid - the other
7 don´t have it.
Dome lid: 1 dome lid, diam. inside = 0,40 m, closeable via 6 fastening screws
Bottom: flat conical
Material: tank stainless steel / transport frame aluminium
Previous use: for food stuff and fruit juices
Remark: 1.) the containers themselves are
tight, however, the tilted valves and supplies in the lids would need
new sealings to make them gas-tight - therefore special price.
2.) the aluminium frames for these vessels have partly cracks or a side beam
is missing. They are not suitable
for stacking anymore but only for transport, therefore special price.
Internal number (Please include with all questions/orders!!): BT25/020b
4 storage tanks in stainless steel, free standing on 3 feet, with manholes
Total capacity: ca. 900 l
Make: Fa. Caspary
Built: ca. 1980
Operating pressure: 1.1 bar (without documents)
Supplies: 1 rest outlet NW 32 G with outlet pipe
1 aeration supply on top middle NW 32 G with cleaning pipe NW 32 G
1 supply sideways in cleaning pipe NW 10 G (without cock)
1 supply for sample cock NW 10 G (sample cock not available)
Size: diam. inside = ca. 1,00 m / H vessel = ca. 1,00 m / H total = ca. 1,85 m
Cleaning: with CIP sprayhead
Manhole: oval-shaped, W = 440 mm / H = 340 mm
Bottom: round bottom
Internal number (Please include with all questions/orders!!): T04/18
7 Beer pressure tanks á 900 l in V4A, standing, on 3 feet
CIP-ready, with glass porthole
Capacity: á 900 l
Make: Fa. GTI Niederlande
Material: 1.4435 (AISI 316 L) called supra - this material is very resistant against chemicals and
many other aggressive fluids.
Outlet: NW 40 disk valve
Size: Diam. = 0,90 m / H completely with feet + armatures = 1,88 m
Glass porthole: Diam.: 120 mm
Working pressure: 1,5 bar (without documents)
Test pressure: 2.0 bar
Armatures: with sprayhead, overpressure valvel and cleaning pipe 1/2"
Internal number (Please include with all questions/orders!!): T04/02
Photos (Example photo)
0 Beer pressure tank 900 l in V4A, standing, on 3 feet, oval-shaped,
CIP-ready, with glass porthole,
(at the moment not available)
Capacity: 900 l
Make: Fa. GTI Niederlande
Material: 1.4435 (AISI 316 L) called supra - this material is very resistant against chemicals and
many other aggressive fluids.
Outlet: NW 40 disk valve
ca. size: H = 1,94 m (with armatures) / H (without armatures) = 1,80 m / W = 0,79 m / D = 0,97 m
Glass porthole: Diam.: 120 mm
Working pressure: 1,5 bar (without documents)
Test pressure: 2.0 bar
Armatures: with sprayhead, overpressure valvel and cleaning pipe 1/2"
Internal number (Please include with all questions/orders!!): T04/02o
1 storage tank in stainless steel, free standing, on 3 VA feet, with plastic ground plates
Total capacity: ca. 940 l
Useable capacity: ca. 900 l
Built: unbekannt
Make: Caspary / Schulz
Operating pressure: 0,99 bar
Supplies: 1 rest outlet bottom middle NW 32 G with
disk valve KM/G
1 supply for sample cock in the middle of the vessel DN 10 G
1 supply for CIP and de-/aeration NW 32 G on top with rinsing pipe
with diskvalve NW 32 KM/G and aeration cock DN 10 KM
Manhole: in vessel, oval-shaped, W = 440 mm / H = 340 mm
CIP: with CIP sprayheads
Bottom: round bottom
Size: Diam. inside = 1,00 m / H total = ca. 1,80 m / H vessel = 1,00 m
Internal number (Please include with all questions/orders!!): T04/18
3 transport containers á 1.000 l, stackable, bottom conical, free standing on standing ring, with shoes for fork lift truck - also suitable for pallet trucks
Make: Schwarz Apparatebau
Capacity: á 1.000 l
Built: 1 x October 1990 / 1 x April 1992 / 1 x Aug 1994
Size: diam. outside = ca. 1,13 m / H with stacking rim = 4 x 1,46 m / 5 x 1,50 m
Operating pressure: 0.2 bar
Allowed steam pressure at 50 degree: 1.1 bar
Allowed density max.: 1,5
Material: 8 x 1.4301 / 1 x 1.4571
Weight: ca. 140 kg
Allowed total weight: 1.640 kg
Minimum thickness of wall: 2 mm
Operating temperature: 50 degree Celsius
Form: cylindrical standing
Bottom: flatconical / round - depth cone ca. 150 mm
Transport equipment: 2 fork lift shoes (also suitable for pallet trucks)
Dome lid: diam. = 400 mm - closeable via clamping ring, sealing via O-ring.
Equipment: 1.) rest outlet NW 50 G with disk valve
(middle of bottom)
2.) overpressure valve on NW 25 KM on top of domelid on 7 tanks / 1 tank with
lid NW 25
Previous use: according to the previous owner, the transport containers were used for alcohol.
Remark: all 3 of these containers have missing clamping rings at the moment.
Internal number (Please include with all questions/orders!!): T03/11
2 Beer pressure tanks á 1.000 l make Duotank in V2A, with manhole,
in stainless steel single frames
Capacity: á 1000 l
Make: Fa. Duotank Niederlande
Type: Gamma bzw. Grolsch
Built: 1993
Supplies: outlet = NW 40 thread-flat, with overpressure and aereation valve = NW 25 KM
ca. size tank: diam. = 1,00 m / L vessel = 1,45 m / L total = 1,65 m with manhole
ca. size in frame: L total = 1,65 m / W total = 1,10 m / H without overpressure armature = 1,30 m
2 viewing glasses: diam.: 70 mm each
Operating pressure: 3,0 bar (without papers)
Test pressure: 4,0 bar
Manhole: round, tiltable, diam. = 445 mm with manhole lid
Frames: different frames
Armatures: Dome armatures:
there is a dome armature available for each tank
(consisting of overpressure valve, pressure meter and cock)
Outlet armatures: prepared for inliners.
There are also new outlet armatures available, which
are not suitable for inliners
(consisting of outlet curve 90 degree with special seat and diskvalve NW 40
cone/thread)
Internal number (Please include with all questions/orders!!): T04/06
Photo (example photos)
0 beer pressure tanks (dispensing tanks) in stainless steel, make Duotank,
insulated and coolable, on the outside with black-lacquered plastic housing,
horizontal in two bearing shells each
(at the moment not available)
Capacity: á 1.000 l
Built: 2006 + 2008
Operating pressure: 3 bar (without papers)
Test pressure: 4,3 bar
ca. size tank: L total = ca. 2,50 m / diam. outside ca. = 0,90 m
Supplies:
1 rest outlet inside diameter 58 mm with outlet curve + disk valve NW 40
G
prepared
for inliners
with 1 overpressure armature each, with overpressure valve, pressure meter
and outlet cock
Manhole: manhole lid in stainless steel, round, diam. = 350 mm
Sight glass: with 2 sight glasses in plastic each
Misc.: the two tanks can be also saddled on top of
each other. For this, you need however to order
two new
double-bearing shells from the manufacturer - please ask about the price.
Internal number (Please include with all questions/orders!!): T04/06/02
Photo (example photo)
0 beer pressure tanks in stainless steel, insulated + coolable, horizontal in single frames(At the moment not available)
(1 x stainless steel / 2 x aluminium - or zinced as well - available)
Remark: at the moment, there is no double frame available to stack the tanks
on top of each other.
Capacity: 1.000 l each
Make: DRU
Type: Typ 3410
Operating pressure: 3 bar (without documents)
Built: unknown
Supplies: 1 restoutlet diameter inside 44 m with
diskvalve (prepared for inliners) each
2 coolant supplies (in-/outlet) each
1 supply for overpressure armature each
Size for each tank: diam. outside = ca. 0,86 m / L tank
with manhole lid = 2,37 m
Bottom: round bottom
Manhole: in frontside 410 x 320 mm with manhole lids
in stainless steel
Misc.: 2 viewing glasses in glass diam. 80 mm
Armatures: 1 outlet armature, prepared for inliners,
with diskvalve each
outlet can be chosen between DN 40 thread or Camlock
1 overpressure armature with overpressure valve and pressure meter
Size single frame: W total = 0,97 m / D total (with
tank) = 2,37 m / H total (without adjusting screws) = 1,23 m
Internal number (Please include with all questions/orders!!):
T04/06/05a
1 Beer pressure tank 1.000 l in V4A stainless steel, lying, round, on 4 feet, CIP-ready, with glass porthole
Capacity: 1000 l
Make: GTI Netherlands
Material: 1.4435 (AISI 316 L), called „Supra“ – this material is very resistant against chemicals and many other aggressive fluids.
Outlet: NW 40 disk valve
Size: Diam. = 0,90 m / L = 1,75 / H completely with feet + armatures = 1,15 m
Glass porthole: Diam.: 120 mm
Working pressure: 1,5 bar (without documents)
Test pressure: 2.0 bar
Armatures: with sprayhead, overpressure valve (2,3 bar) and cleaning pipe 3/4"
Remark:
the upper tubes are only available for 8 of these tanks.
overpressure-armatures are available for all tanks.
Internal number (Please include with all questions/orders!!): T04/05
11 Beer pressure tanks 1.000 l in V4A stainless steel, lying, oval, on 4 feet, CIP-ready, with glass porthole
Capacity: á 1000 l
Make: GTI Netherlands
Material: 1.4435 (AISI 316 L), called „Supra“ – this material is very resistant against chemicals and many other aggressive fluids.
Outlet: NW 40 disk valve
Size: L = 1,85 m (with armatures), W = 0,79 m, H = 1,30 m (with armatures)
Glass porthole: Diam.: 120 mm
Working pressure: 1,5 bar (without documents)
Test pressure: 2.0 bar
Armatures: with sprayhead and overpressure valve (2,3
bar).
Cleaning pipes 3/4" are only available for 8 of these tanks.
Feet: 9 tanks have feet with are attached with
belts /
2 tanks have feet
which are welded on (see photos)
Internal number (Please include with all questions/orders!!): T04/05/01
0 Dispensing tanks (beer pressure tanks) make Bierdrive, insulated and coolable,
horizontal in single aluminium frames
(at the moment not available)
Total capacity: 1.050 l
Useable capacity: 1.000 l
Cooling jacket capacity: 11 litres
Built: 1 x 1985 / 1 x 1989
Type: BD/EJ-1050-860
Manufacturing.-No: 6/218 + 6/1230
Operating pressure: tank 3 bar / cooling jacket 3 bar
Size: L total = 2,55 m / diameter outside = 0,87 m
Viewing glasses: 2 viewing glasses, diam. = 65 mm
Manhole: diam. = 400 mm (round)
Rest outlet: NW 40
Coolant supplies: 3/8" box, 1 x both on underside front / 1 x both on underside sideways
Armaturen: armatures available
Frames: the following frames are available: 2 x aluminium
single frame / 1 x aluminium double frame
(on top of each other)
Remark: the cooling system has been checked for tightness.
Internal number (Please include with all questions/orders!!): T04/06/07a
Photos (example photos)
1 Dispensing tank (beer pressure tank) make Bierdrive, single-walled, horizontal,
in single frame
Total capacity: 1.050 l
Useable capacity: 1.000 l
Built: please ask
Manufacturing.-no.: please ask
Operating pressure: 3 bar (without documents)
Size tank: L total = ca. 2,45 m / diam. inside = 0,80 m
Sight glass: 2 sight glasses, diam. = 65 mm
Manhole: diam. = 400 mm (round)
Rest outlet: NW 40
Armatures: complete with armatures
Inliner: the tanks can be used with and without inliners
Frame: in single frame
Internal number (Please include with all questions/orders!!): T04/06/08a
Please ask for photos
20 Beer pressure tanks á 1.000 l in V4A stainless steel, standing, round, on 3 feet, CIP-ready, with glass porthole
Capacity: á 1000 l (total capacity ca. 1035 l)
Make: Fa. GTI Niederlande
Material: 1.4435 (AISI 316 L), called „Supra“ – this material is very resistant against chemicals and many other aggressive fluids.
Outlet: NW 40 disk valve
Size: Diam. = 0,90 m / H completely with feet + armatures = 2,05 m up to 2,08 m
Glass porthole: Diam.: 120 mm
Working pressure: 1,5 bar (without documents)
Test pressure: 2.0 bar
Armatures: with sprayhead, overpressure valve (2,3 bar) and cleaning pipe 1/2"
Internal number (Please include with all questions/orders!!): T04/07
0 Beer pressure tanks á 1.000 l in V4A stainless steel, standing, round, with polished frame, on 3 feet, CIP-ready, with glass porthole
(at the moment only with not-polished frame available)
Capacity: á 1000 l (total capacity ca. 1035 l)
Make: Fa. GTI Niederlande
Material: 1.4435 (AISI 316 L), called „Supra“ – this material is very resistant against chemicals and many other aggressive fluids.
Outlet: NW 40 disk valve
Size: Diam. = 0,90 m / H completely with feet + armatures = 2,05 m
Glass porthole: Diam.: 120 mm
Working pressure: 1,5 bar (without documents)
Test pressure: 2.0 bar
Armatures: with sprayhead, overpressure valve (2,3 bar) and cleaning pipe 1/2"
Misc.: there are some tanks available with adjusting screws on the feet and some without adjusting screws. The ones without adjusting screws have a slightly lower price.
Internal number (Please include with all questions/orders!!): T04/07/Poliert
2 Beer pressure tanks á 1.000 l in V4A stainless steel, standing, oval, frame polished, on 3 feet, CIP-ready, with glass porthole
Capacity: á 1000 l
Make: Fa. GTI Niederlande
Material: 1.4435 (AISI 316 L), called „Supra“ – this material is very resistant against chemicals and many other aggressive fluids.
Outlet: NW 40 disk valve
Size: H = 2,08 m (with armatures) / W = 0,79 m / D = 0,97 m
Glass porthole: Diam.: 120 mm
Working pressure: 1,5 bar (without documents)
Test pressure: 2.0 bar
Armatures: with sprayhead, overpressure valve (2,3 bar) and cleaning pipe 1/2"
Remark: the tanks have partly got some
"abrasions" during the dismantling -
one tank has a slight dent at the backside - therefore special price
(please ask)
Internal number (Please include with all questions/orders!!): T04/07/01
Photo (example photo)
2 items beer pressure tanks, make DRU, single-walled, horizontal, in double frame
on top of each other
(at the moment not available)
Capacity: á 1.000 l
Make: Fa. DRU-BV
Type: 110 M
Built: 1995
Material: 1.4301
Operating pressure: 3 bar
Supplies: 1 rest outlet NW 40 with 90-degree-curve and
disk valve NW 40 G
1
supply for overpressure armature
Size with lid: L total = 2,35 m / L vessel = 1,86 m /
diam. outside = 0,79 m
Size in triple frame:
L total = 2,35 m / W total = 1,63 m / H = ca. 1,90 m
Size in double frame on top of each other: L total =
2,55 m / W total = 0,875 m / H total = ca. 2,15 m
Size in single frame: L total = 2,35 m / W total =
0,90 m / H total = ca. 1,04 m
Form: cylindrical, horizontal
Bottom: round bottom
Manhole: oval, W = 415 mm / H = 325 mm, with
lid in stainless steel
Viewing glasses: 2 viewing glasses each, diam = 80 mm
each
Armatures: 2 x outlet armature with disk valve NW 40 G -
prepared for inliner /
or 2 x outlet armature with disk valve NW 40 G - not prepared for inliner /
2 x dome armature with overpressure valve, pressure meter and T-supply for
CO2 + air
Documents: no documents available
Internal number (Please include with all questions/orders!!):
T04/09
7 Beer pressure tanks, make H+F Technik, single-walled,
horizontal in 2 x triple frame, next to each other and 1 x single frames,
also possible in 4 x single frames
Capacity: 1.000 l
Make: H + F Techniks Lichtenvoorde
Type: 1 x CH 1000 / 2 x CHO 1000 /
Built: 1 x 1999 / 2 x 2000
Material: 1.4301
Operating pressure: 3 bar (without papers)
Test pressure: 4 bar
Supplies: rest outlet NW 40 (with or without preparation for Inliner)
Size tank: L total = 2,35 m / L frame = 1,90 m / diam. outside = 0,80 m
Size with triple frame: L total = 2,35 m / W total = 2,45 m / H total = ca. 1,20 m (without pressure armatures)
Size with other frames: please ask
Form: cylindrical, horizontal
Bottom: round bottom
Manhole: oval-shaped, W = 445 mm / H = 415 mm, with acrylic glass lid
Armatures: 1 x outlet armature with diskvalve NW
40 (with or without preparation for Inliner)
1 x new overpressure armature with overpressure valve,
pressure meter and outlet valve
Documents: no documents available
Internal number (Please include with all questions/orders!!): T04/10
4 beer pressure tanks in stainless steel, make GTI, horizontal, in double frames on
top of each other or in 2 x single frames in stainless steel
Total capacity: á 1.027 L
Useable capacity: á 1.000 L
Make: Fa. GTI
Built: 2 tank built 2003 (outlet DN 40 thread) +
1 tank built 2005 (outlet Camlock 30 mm)
2
tanks build 2005 (double frame next to each)
Operating pressure: 3 bar
Test pressure: 3.9 bar
Empty weight: each tank 120 kg
Supplies: 1 rest outlet diam. 35 mm with outlet
armature with disk valve, prepared for inliner
(4 x outlet DN 40 thread + 1 x outlet camlock 30 mm - if wished possibly
more of them)
1 supply for overpressure valve diam. outside 26 mm with overpressure valve
Size tank: L total = 2,38 m / L vessel = 1,75 m or 1,90 m / diam. = 0,79 m
Size single frame: L total = 2,38 m / W total = 0,885 m / H total = 1,10 m
Size in double- or transport frame: L total = 2,38 m / W = 0,89 m / H = 1,98 m
Manhole: W = 250 mm / H = 220 mm / with acrylic glass lid (thickness 25 mm), tiltable
Armatures: 1 outlet armature with diskvalve and
45-degree-curve NW 40 G, prepared for inliner
1 dome armature with overpressure valve, pressure meter and outlet cock,
with check valve
Remark: the tanks have an aearation pipe inside, see photo.
Internal number (Please include with all questions/orders!!): T04/12b
Photos (example photos)
3 beer pressure tanks make Duotank, single-walled, horizontal in 1 x VA double frame
on top of each other and 1 x VA single frame
Capacity: 1.000 l
Make: Fa. Duotank
Type: Beta
Built: 2 x 1998 / 1 x 2000
Material: 1.4301
Operating pressure: 3 bar
Test pressure: 3,9 bar
Supplies: 1 rest outlet NW 40 with diskvalve reduced
to DN 25 thread
1 supply NW 25 KM for overpressure armature
Size: L total= 2,63 m / L vessel = 2,25 m / diam.
outside = 0,75 m / W with frame = 0,84 m
H in frame without
overpresssure armature = ca. 1,03 m (single frame)
Form: cylindrical
Bottom: round
Manhole: round, diam. = 350 mm, with acrylic glass lid
Armatures: outlet armature with disk valve NW 25 G -
prepared for inliner
overpressure armature in stainless steel
Documents: no documents available
Misc.: the tank is prepared for use with inliners
a new seal for
the manhole lid of one tank is necessary (the old one is not tight anymore)
Internal number (Please include with all questions/orders!!): T04/16
Please ask for photos
1 pressure tank in stainless steel, single-walled, free standing on 3 VA feet with adjusting screws
Nominal capacity: 1.100 litres
Make: Waldner Wangen
Built: 1989
Operating pressure: 2.5 bar (without documents)
Manufacturing no.: 1863
Size: H without overpressure armature, with adjusting
screws = 2,35 m /
diam. outside = 845
mm / diam. inside = ca. 850 mm
Supplies: 1 rest outlet DN 32 bottom middle
with diskvalve thread
1 supply on top in the middle DN 32 thread (to CIP spray ball)
Armatures: 1 overpressure-/vacuum armature with
pressure meter and disk valve, also with cleaning pipe
to the CIP sprayhead, CIP sprayhead, outlet diskvalve DN 32 thread, 3
adjusting screws with
3 ground plates
Manhole: sideways, tiltable via tilting bow, size W = 440 mm / H = 340 mm
CIP: with CIP spray ball
Misc.: tank is prepared for height meter with 2 VA
cocks via tube
(cocks for
height meter are built into outlet pipe and overpressure pipe on top)
Internal number (Please include with all questions/orders!!): T04/21
1 cylindrical tank (buffer tank) make Huppmann, with standing frame in stainless steel, free standing on 6 VA feet
Capacity: 1.400 l
Built: 1997
Manufacturing-No.: 070 2091
Size: Diam. = 1,10 m / H total = 2,18 m / H vessel =
1,95 m /
Diam. inside = 1,00 m / H
vessel = 1,80 m
Supplies: 1 inlet on top NW 40 S / 1 outlet on
top NW 100 reduced to NW 50
4 supplies 1/2-inch-pipe with nipple 2 x at bottom / 2 x on top opposite to
each other
1 supply for probe 1"
Bottom: flat bottom
Remark: the vessel has at the moment no rest outlet and no manhole or dome lid.
Internal number (Please include with all questions/orders!!): T04/25
1 Mash tank with manual agitator, coolable, one-walled, marmorated, free standing on 3 feet
Capacity: 2.300 l
Size: Diam. = 1,20 m / H frame = 2,00 m / H total without agitator = 2,50 m / H total with agitator = 2,80 m
Supplies: 1 rest outlet NW 65 G with ball cock
1 clear outlet NW 100 G with disk valve
1
sample cock with ball cock (under clear outlet)
Dome lid: Diam. = 390 mm
Cooling: 1 cooling template in tank (W = 370 mm / H = 2.000 mm)
Agitator: 1 manual agitator, usable via hand crank
Wave: Diam. = 20 mm / L = 1.200 mm
Wing: 3 x 3er wing 400 mm + 1 x 2er wing 500 mm
Misc.: prepared for temperature probe
Internal number (Please include with all questions/orders!!): T05/09
1 Double jacket tank coolable and heatable, free standing on 4 feet in stainless steel with adjusting screws
1 pressure tank in stainless steel (made in the UK) with dome lid, free standing on 3 VA feet
with ground plates, not coolable, not insulated
1 CIP tank in stainless steel, free standing on 3 adjustable feet
(not insulated - previously fresh water tank)
2 tanks in stainl. steel, horizontal on 2 storage-scales in iron (welded)
1 Whirlpool in stainl. steel, free standing on zinced frame
(there´s an option at the moment)
2 pressure tanks in stainless steel, free standing on 5 feet with adjusting screws
1 tank in stainless steel, standing on 4 feet, with adjusting screws
(previously hotwater tank)
Make: Gebr. Hagemann Beckum
Capacity: 15.400 l
Operating pressure: according to type sign 3 bar (no documents)
Built: 1983
Material: 1.4304
Manufacturing-no.: 83/0096
Com.no.: 83/367
Size: H total = 3,80 m (without feet ca. 3,75
m)
H vessel =
2,00 m
Diameter = 2,60 m
Strength of round bottoms: 5 mm
Empty weight: 1.070 kg
Supplies: 1 rest outletNW 65 G with outlet dome diam. 300 mm,
outlet pipe prolonged until tank edge
2 x NW 32 G
on top (1 x aeration / 1 x CIP)
1 x NW 10 G on top
5 supplies 2-inch-nipple distributed over the vessel, with 4 pipes inside
with holes sideways
1 blind thread DN 25 G on vessel
1 probe supply in the middle
CIP: with CIP sprayhead, supply NW 32 G
Manhole: sideways-oval, size 440 x 340 mm, tiltable
Internal number (Please include with all questions/orders!!): T11/15
1 tank in stainless steel, free standing on 4 VA feet, heat- and coolable
Capacity: ca. 19.000 l
Armatures: at the moment not available, please ask
Spray head: with CIP sprayhead, but without spray pipe
Size: diam. ca. 2,86 m / height ca. 4,80 m
Supplies: please ask
Further information: please ask
Internal number (Please include with all questions/orders!!): T12/04
1 beer tank in stainless steel, free standing on 4 VA feet with adjusting screws
Make: Fa. Hinke
Capacity: 22.000 l
Built: 1973/88
Manufacturing-No.: 6223
Operating pressure: 0,99 bar
Size: H total without dome armature = ca. 6,10 m / H frame = ca. 4,90 m / diam. = ca. 2,275 m
Weight: ca. 1.800 kg
Supplies: 1 rest outlet NW 65 S
1 aeration cone and spray head socket NW 65
Manhole: 450 x 350 mm
CIP: with CIP sprayhead and cleaning pipe NW 65 and height meter in stainless steel
Misc.: 2 crane hooks
Internal number (Please include with all questions/orders!!): T12/10
Back to the top
Back to the selection
Copyright © 2002 Albin Halbritter GmbH. All rights reserved.
updated: 04. März 2021